Steel spec:
43a grade prime plate 10/6/5/4
Base framing:
75x50x6 angle to base at 610mm centers with keelson to center
Hull side framing: 50x50x6 angle as two stringers
Roof framing: 25x25x3
box section rolled to 95mm rise at 425mm centers
Guards:
50x12 convex double welded
Flared bows.
Access hatch to rear deck.
Heavy duty engine bearers.
Above counter engine room. Bulkhead 10mm thick.
Steel doors facings with lift off hinges. 30mm angle to door
apertures. 4mm steel.
Rear sliding hatch on brass runners.
220 ltr fuel tank pressure tested.
Quick release weedhatch
Gas
locker vented and fitted with plank effect lid.
Scalloped effect to cants and handrails.
Window apertures to
suit customers layout.
Delivered in heavy primer inside and out with comastic to the hull
